Add heavy items to the containers to prevent them from sliding around. Add labels to the outside of the containers so you know what’s inside them. Use these containers to store seasonal clothes or items you don’t use on a daily basis.
The number of books in each stack will vary depending on the height of the space under your bed, and the thickness of your books.
Ask around at a local shoe store to see if they have extra boxes. Place heavy items inside the boxes to prevent them from sliding around.
If the height of the space is close to 2 inches (5. 1 cm), you only need 1 “level. ” If it is more like 4 inches (10 cm), you need 2. If it is closer to 6 inches (15 cm) you need 3. Pipe insulation can be purchased at home improvement stores.
If your bed is significantly larger than a standard queen or king, you will need more pipe insulation. A standard twin bed is 39 inches (99 cm) wide by 80 inches (200 cm) long. For a bed this size, you can use just 4 pieces per level.
Most standard beds are 80 inches (200 cm) in length. Pipe insulation comes in pieces {{convert}76|in|cm}} long, so you need to add an extra 4 inches (10 cm) for most beds. If your bed is longer than 80 inches (200 cm), your extension pieces will need to be longer. If you will be installing 2 levels, you will need 4 extender pieces. If you will be installing 3, you’ll need 6.
If you are installing 1 level, you need to create 2 pieces that are 80 inches (200 cm). For 2 levels, you’ll need 4. For 3 levels you’ll need 6. Use scissors to trim the excess plastic from the tightened zip tie.
If you have a king-size bed, you should not need to trim the insulation. For a queen-size bed, you will be removing about 16 inches (41 cm). For a twin bed, you will be removing around 37 inches (94 cm).
Use scissors to trim the excess plastic from the tightened zip tie.
If you will create a third level, push the second level up and add it underneath.
